Product information

Automatic Urethane Foam Tester

• Deliver High Precision Measurement via 3 load cells even if there is unbalance load. The tester alone can meet a variety of specifications such as JIS K6400-2, JASO B408 & etc.

• This UFT series can satisfy a variety of urethane foam test. The 3 load cells enable this tester to deliver high precision load detection even in the presence of unbalance load. Test sample placed on the wide test table (1000 x 700mm) can be measured just as it is. For instance a car seat can also be place on the test table and measurement can take place as it is. The installed urethane foam testing program can change “{eb9cfd4e3b516869cb839b8b2c338ebd16b99827caa87fe8648376116c5dd92c}”, “Cycle” and “Time”.

• The tester also meets the Hardness Test and Deflection Test Specifications of Automotive Manufacturer under fixed load.

• Test Conditions and Results can be stored in USB Memory and export to Microsoft Excel for Test Inspections. The tester also adopts “Program Load” via USB Memory and it can also meet requirements of any custom made test.

• External control test using PC Software is also possible.

Click here for test condition 

Download Catalogue

TYPE OF TEST
  • Hardness Test JIS K6400-2 Method A, B, C & D
  • Compression Deflection Test JIS K6400-2 Method A-1 & A-2
  • Compression Deflection Test JIS K6400-2 Method B
  • Micro Displacement Spring Rate Test
  • Stress Relaxation Test
  • Compression Load Test
  • External Control Test via PC
SPECIFICATION
Model UFT-2KN UFT- 5KN
Test Table Size 1000 x 700 mm
Standard Anvil Dia Universal Ball Joint ɸ 200mm anvil
Applicable Specifications JIS B 7721 COMPRESSION / TENSION TESTER CLASS 0.5
Stroke 550mm
Length Resolution 0.1 or 0.01 mm (convertible)
Length Accuracy Within ± (0.05+0.0001L)mm (L is arbitrary length in mm)
Test Speed 1~1000mm/min
Cross Head Control Precision ball screw and AC servo motor controlled
Move Key Function High Speed : 600 (mm/min) Step (Inching) 1 (mm)
Medium Speed : 60 (mm/min) Step (Inching) 0.1 (mm)
Low Speed : 6(mm/min) Step (Inching) Noting
Capacity Main body is capable for 2kN Main body is capable for 5kN
Load Cell 3 load cells
(Useful for unbalance load and precision measurement)
Range Changeover 4 Ranges Manual or Automatic
Load Resolution Measurement Range 2000N 1000N 500N 200N 5000N 2000N 1000N 500N
Load resolution 0.1N 0.1N 0.1N 0.01N 1N 0.1N 0.1N 0.1N
Load Accuracy ± 0.5{eb9cfd4e3b516869cb839b8b2c338ebd16b99827caa87fe8648376116c5dd92c} of Applied Load
Unit N kN(kgf. lbt)
Protective STOP Function STOP via Up/Down Limit Switches
STOP via range over
STOP via STOP key or Emergency STOP key
STOP via value set by testing software
Display LCD LCD with CCFL Backlingt
Backlight lifespan 25.000h Half-reduced brightness lifespan
Display Area W147 x H110mm
Display Resolution 640 x 480 dot
PC Software The tester alone can perform testing
MXR-01 (Urethane Foam testing mode)
Printer (Internal Printer) Thermal transfer dot printing
Print density 8 dot/mm
Effective print width 108mm
Print speed: 480 dot line/sec
Interface RS232C
Photocoupler insulated input / output + common.
Input 8 points output 8 points (judgment output)
Analog output : FORCE, DISTANCE
Power supply Single phase AC100V or AC200V
Power Rating 300VA
Dimension W1115 x D750 x H1980
Weight Approx. 350kg