Product information

MAX-T Digital Torque tester

MAX-T DIGITAL TORQUE TESTER
CHARACTERISTICS
  • A TESTER WITH A COMPUTER
    Max-T Series is a tester with intelligence. It computes the angletorque Etc. parameter, thus achieving precision results.
  • BUILT-IN USB Drive
    The MAX series is a load tester with built-in USB Drive in it. Through this facility, you can store and save your job more conveniently
  • DISPLAYAND PRINTING
    You can see the test results and curve of torque/angle on the high density LCD on the MAX tester and also the built-in printer can print out. The CENTRONICS INTERFACE (RS232C) enables outside printer to print test results out in form of test report.
  • DATA MAGNIFESTATION
    Through the display, can show various data’s (biggest torque, specify the angle etc.); through the upper and lower limit, test values etc., the parameters can carry out quality’s judging conveniently
  • THE ENVIRONMENT MEMORY FUNCTION
    Testing environment and conditions can be conveniently saved in the memory of the system, thus when you test the same product, can adjust to use the parameter in the memory conveniently, avoiding the hassle to set them again.

Download Catalogue

SPECIFICATION
Model MAX- T20NM MAX-T-100NM MAX-T-200NM MAX-TU-20NM
Maximum Capacity 20Nm 100Nm 200Nm 20Nm
4 sub range of capacity 20Nm, 10Nm, 5Nm, 2Nm 100Nm, 50Nm, 20Nm, 10Nm 200Nm, 100Nm,50Nm, 20Nm 20Nm, 10Nm, 5Nm, 2Nm
Resolution 0.001Nm, 0.001Nm, 0.001Nm, 0.0001Nm 0.01Nm, 0.01Nm, 0.001Nm, 0.001Nm 0.01Nm, 0.01Nm, 0.01Nm, 0.001Nm 0.001Nm, 0.001Nm, 0.001Nm, 0.0001Nm
Accuracy ± 1.0% of Applied Torque
Torque Cell Channel 5 Channels (Able to input up to 5 torque cell)
Maximum Test Angle ±36,000 Deg for Basic Model & ±7,200 Deg for High Grade Model
Resolution 0.1 Deg for Basic Model & 0.01 Deg for High Grade Model
Angle Accuracy ± 0.5Deg for Basic Model & ± 0.3 Deg for High Grade Model
Rotation Rotary Table is Rotating Torque Cell side is rotating
Rotation Speed 1 ~7200 Deg/min
Unit Nm / Ncm / kgf.m / kgf.cm / kgf.mm / gf.m /gf.cm / gf.mm
Display Size CCFL Backlight LCD, W : 147 x H : 110mm
Data Storage 100 Curves & Conditions per 1.44Mb
I/O Port RS232C Interface, Digimatic Input, Analogue Output,Centronics Interface
Power Supply Single Phase AC 200 ~ 240V (50/60Hz)
Power Rating 100VA 300VA 500VA 100VA
Dimension W570 x D480mm x H800mm W570 x D480mm x H800mm W600 x D480 X H1028mm W570 x D480mm x H800mm
WEIGHT Approx. 90kg Approx. 105kg Approx. 150kg Approx. 90kg