• Manual or Automatic test can be selected.
• Measurement of torque and load, as well as angle based on torque or load input are done easily. (PRO-TS Type)
• Jacob Chuck is built in the rotating table which provides a very convenient structure for holding the center pin.
• Can saved up to 50 memories of test conditions . Test can start immediately once condition are retrieve.
Product information
Pro-T Series Torsion Spring Tester
PRO-T SERIES TORSION SPRING TESTER
CHARACTERISTICS
FEATURES
- Position of XY table and rotary table are display on the screen by numeric information from digital scale.
- Position of Load Pin, support Pin & Center Pin are automatically calculated and display on screen.
- OK / NG judgement is display by bar chart on the screen with spec input.
Please refer to: Grade-specific functions and feature table PRO-T
SPECIFICATION
MODEL | PRO -TSE-50N-2 | PRO-TSE-100N-2 | PRO -TSE-500N-2 |
---|---|---|---|
Maximum Torque | 3N.m | 6N.m | 20N.m |
Maximum Load | 50N (5kgf) | 100N (10kgf) | 500N (50kgf) |
2-Step Auto Switch Over Range | 50N / 5N | 100N / 10N | 500N / 50N |
Load Resolution | 0.01N / 0.001N | Load Resolution | |
Torque Resolution | 0.01N.mm / 0.001N.mm | Torque Resolution | |
Load Unit | N , gf, kgf, lbf | ||
Torque Unit | N.mm, N.cm, N.m, gf.mm, gf.cm, gf.m, kgf.mm, kgf.cm, kgf.m, lbf.in | ||
Test Speed | 10 ~ 1800 Deg/min | ||
Maximum Allowed Coil Diameter | Ø50mm | ||
Maximum X-Axis Movement | 60mm | ||
Maximum Y-Axis Movement | +/- 25.00mm | ||
Maximum Measuring Angle | 0.1 ~ 7200.0 Deg (+/- 20 Turns) | ||
Deflection Direction | Left & Right | ||
Up/Down Table Movement | 80mm | ||
Power Supply | Single Phase AC 200 ~ 240V (50/60Hz) | ||
Power Rating | 200VA | ||
Dimension | W 550 x D450 x H520mm | ||
Weight | 75kg |
Model | PRO-TT-01NM | PRO-TT-1NM |
---|---|---|
Maximum Torque | 0.1Nm | 1Nm |
2-Step Auto Switch Over Range | 100Nmm/ 10Nmm | 1000Nmm/ 100Nmm |
Torque Resolution | 0.01Nmm/ 0.001Nmm | 0.1Nmm/ 0.01Nmm |
Test Speed | 10 ~ 1800 Deg/min | |
Maximum center pin diameter | Ø6.5 | |
Maximum X-Axis Movement | 13mm | |
Maximum Y-Axis Movement | 50mm | |
Maximum Measuring Angle | 0.1 ~ 7200.0 Deg | |
Deflection Direction | Left & Right | |
Power Supply | Single Phase AC 200 ~ 240V (50/60Hz) | |
Power Rating | 200VA | |
Dimension | W550 x D450 x H520mm | |
Weight | 75kg |