| ITEM | RMT-1 | RMT-3 | ||||||
|---|---|---|---|---|---|---|---|---|
| Minor load | 98.07 N | 29.42N | 98.07 N | |||||
| 10kgf | 3kgf | 10kgf | ||||||
| Test load | RMT-1 | 588.4 | 980.7 | 1471 | N | |||
| 60 | 100 | 150 | kgf | |||||
| RMT-3 | 147.1 | 294.2 | 441.3 | 588.4 | 980.7 | 1471 | N | |
| 15 | 30 | 45 | 60 | 100 | 150 | kgf | ||
| Minor load position setting | Automatic setting (LCD graph and electronic signal monitoring fine adjustment is unnecessary.) | |||||||
| Load control | Automatic (Loading --> holding --> release) | |||||||
| Start operation | Automatic start/ Manual start selection | |||||||
| Dwell time | 1~99 sec | |||||||
| Plastic measurement | Standard function, time up to hardness value display after release: 1 to 99sec | |||||||
| Scale display | C D A G B F K E H P M L V S R | 15N 30N 45N 15T 30T 45T 15W 30W 45W 15X 30X 45X 15Y 30Y 45Y C D A G B F K E H P M L V S R |
||||||
| Data output | 1) Centronics (standard) 2) RS232C or serial output selectable (Factory setting: RS232C) |
|||||||
| Data memory | Max. 256 test data | |||||||
| Hardness conversion | Specified scale on real time display. | |||||||
| OK/NG criteria | Upper and lower limits setting, and HI/OK/LOW display. | |||||||
| Data edition | Batch conversion of memorized data. (Max.value, Min.value, dispersion ( R ), mean value) Converted values, same too. |
|||||||
| RS232C Communication line | Baud rate: 1200/ 2400/ 4800/ 9600 bps selectable Error detection, Parity even/ Parity none/ selectable |
|||||||
| Accuracy | Conform to JIS B7726 and ASTM E-18 | |||||||
| Max.specimen height | 250mm | 200mm | ||||||
| Max.specimen depth | 165mm | |||||||
| Dimensions | W220 x D540 x H830mm | |||||||
| Weight | Approx. 80kg | |||||||
| Power supply | Single phase AC100~240V 50/60Hz available for export models. | |||||||
