| ITEM | CONTENTS |
|---|---|
| Knoop indenter | Effectively measures thin material |
| Camera attachment | A Polaroid camera adapter need |
| TV measuring device | A TV camera may be mounted on the ocular. Enlarged indents are measured on the TV monitor and metal structures are observed easily |
| Automatic X-stage & PC type controller VMT-1000PC |
Measuring range: X&Y axis each 100mm Min. movement: 1/100mm These devices are very effective when we indent continuously. All operations are controled by PC |
| Round table | Suitable for testing large specimens |
| Manual X-stage | Max. movement: X&Y axis 25mm and 50mm |
| Precision Vice | Max. opening: 50mm and 100mm |
| Micro test table for jominy test | Specimen: Standard size (mm or inch) provided in ISO and JIS Max. movement: approx. 55mm Min. micrograduation. 1/10mm or 1/160 inch. |
| Rotary table | This table is usually used on the micro test table with the precision vice. |
| Thin specimen measuring device | Specimen thickness: 0~5mm |
| Fine specimen measuring device vertical type | For measuring the cross section of fine specimens. Specimen diameter: 0.1~4 mm. |
| Fine specimen measuring device horizontal type |
For measuring the cylindrical surface of fine specimens. Specimen diameter: 0.5~4 mm. |
| Specimen inclining device type II | Vice is not used and a specimen is directly clamped. The measuring surface always shows a horizontal level and cause an extremely efficient measuring operation. Specimen height: 5~21mm |
| Printer M-3110 | From Hardness tester adding up results to data output. |
