Our Products

• High Resolution- Image can be displayed up to a resolution of 1600 x 1280 for PC models at 10 frame per sec & 410,000 pixels for TV models.
• Light and portable (comes with a stylish carry case).
• Comeswith the Micro Scale software which enable to do simple measurements andbrightness and contrast adjustments.
• White LED lighting which have a longer lamp life up to 12,000 hours continuously running.

• Available for hardness measurement with one-push operation and output to personal computer and printer is executable.
• High repeatability of the hardness readings is assured from the flexible joint function and a constant pressure loading mechanism.
• Stable measuring position can be obtained constantly with double slide shaft.

• When attempting to measure hardness manually , inconsistent pressures and/ or speeds are used while pressing the indentor and presser foot. This causes a problem of deviation in measured results.
• To solve this problem, CL-150 Series constant pressure/speed loaders have been developed. Applicable standards refer to this type of loader as a ‘Durometer Holder.’

• ASKER Model F - ASKER Model FP
Exclusive type for foam materials, allowing measurement by placing the tester on the object o measurement.
In addition to Model F, Model FP is available for powder puff.
• ASKER Model CS
This features larger indentor and a more strong spring compared to ASKER C, thereby making it more suitable for poystyrene foam.

• The full-automatic wheel gear measuring instrument, adopting to synthesize the DDC electronics circulatory system creatively, the simple operation can immediately carry out the fast test with high accuracy; the machine of the high strength designs, raising the stability of the test process; match with the profession test software, thus monitoring it in brief convenient, the data is more accurate to pretend to fulfill.

• Tester, calibrated by automatic calibration function, does not need to be re-adjusted for zero-point before each measurement.
• The size management program displays the average, minimum center distance and maximum center distance.
• Automatically compensates for the runout of the master gear.

• The HF series is used not only for load measurements but also for a variety of tests including switch test.
• Connector’s insertion/ withdrawal test and break-down test.
• In addition, low-cost centronics interface which enables printing of measured data and statistical data through portable printer is also available.

• This handy analog force gauge delivers high accuracy and is easy to operate.
• Change-over from peak indication to track indication is effected by a mere one-switch operation.
• 3 types of scale are available, namely AK (kgf scale), AN (Newton scale), NK (n & kgf dual scale).
• Corresponding to application type, user can choose from a range of 1kgf(10N) to 50 kgf (500N).

• An Automatic Horizontal Servo Control Test Stand which fully utilize the features of Handy Force Gauge
• Simple Mode for easy testing and a Detail Mode for setting holding time, interval time, forward & return test
• Use digital method, simple and accurate of Test Speed and Test Range setting is available

• An Automatic Vertical Servo Control Test Stand which fully utilize the features of Handy Force Gauge
• Simple Mode for easy testing and a Detail Mode for setting holding time, interval time, forward & return test
• Use digital method, simple and accurate of Test Speed and Test Range setting is available
• Pre set MAX load function to prevent load cell from overloading